126182 MANUAL 762 10 OPAL
Table Of Contents
- Spiskåpa 762–10/B
- SV Bruksanvisning
- Spiskåpa 762–10/B
- DA Betjeningsvejledning
- Cooker hood 762–10/B
- GB User instructions
- Kjøkkenhette 762–10/B
- NO Bruksanvisning
- Fig. 12
- Fig. 13
- Fig. 14
- Fig. 15
INSTALLATION
Cooker hood for wall mounting. The cooker
hood is equipped with electronic control, a
motorised damper, LED lighting and a metal
mesh filter. Installation, use, care, mainte-
nance etc., are described in these
instructions.
TECHNICAL INFORMATION
Fig. 1
Width 60 and 90 cm
Other
measurements
see Fig. 1
Electrical
installation
230 V~ earthed.
Max. connection
output for control
cable
900 W at 230 V~
Lighting LED 2 x 2 W
INSTALLATION
Fixing parts, screws for mounting, etc. are
supplied with the cooker hood.
Electrical installation
The cooker hood is supplied with an electri-
cal cable and earthed plug for connection
to an earthed wall socket as well as a con-
trol cable for connection to an external
unit.
The junction box or wall socket should be
positioned as shown in the measurements,
Fig. 2.
When installing with an extended upper
chimney part, take this into account when
positioning sockets.
The junction box and wall socket must be
accessible after installation is complete.
Replacement of damper hatch
N.B. Only applicable where basic ventilation
takes place via the cooker hood.
The cooker hood is fitted with a sealed
damper. If the cooker hood is used in a kit-
chen that does not have separate basic
flow ventilation, it must be fitted with an ad-
justment hatch for basic flow. Replace the
damper hatch before installing the cooker
hood, see separate instructions
20
991.0433.863/126182/2016-02-08