HANDLING CONTROL UNITS

1 (3)
Safe handling of control units and switchgear
Preliminary Remarks
Danger
If the corresponding precautionary measures are not taken, death, severe injury or considerable property damage will occur.
Warning
If the corresponding precautionary measures are not taken, death, severe injury or considerable property damage may occur.
Caution
If the corresponding precautionary measures are not taken, injury or property damage may occur.
Important
Important information on the system or the respective part of the manual that must be noted specifically.
Validity:
Important
When the latest version of this operating manual enters into effect, any already-compiled instructions and their corresponding specifications
shall lose their validity!
Note:
Important
This manual contains relevant safety notes and information on the intended use of control units and switchgears. Therefore, read these
instructions with care. Any warranty claim against the manufacturer shall lapse if not observed.
Safety
Danger
All work on the control units and switchgears must be performed by trained electricians according to the provisions of the VDE (Verband
Deutscher Elektrotechniker). They must only be conducted when the system is powered down.
Important
Observe these five safety rules!
• Power down
• Secure against reactivation
• Verify that no voltage is pending
• Earth and short-circuit
• Cover or fence off adjacent live parts
Warning
Facility safety devices and systems must be reviewed for intended function before commissioning of the systems.
Safety devices are:
• EMERGENCY OFF circuits
• End position switches
• Safety temperature limiters
• Air flow monitoring
Systemair GmbH, Seehöfer Straße 45, 97944 Boxberg, Germany
Phone: [phone] Fax: [phone] -en-