SAVE VTC 700 INSTALLATIONV01

ManualsBrandsSystemair ManualsCounter flow unitsSAVE VTC 700 L - Multiple control options to choose from

9

Table Of Contents

8

| Electrical Connections

1 Remove the front hatch by the use of an 8 mm Allen key, after which the

hatch is tilted back and lifted off completely.

2 Open the side panel by removing 4 screws.

3 Remove the top cover plate (pos. 1) by removing 2 screws (pos. 2) in the

lower front edge of the plate.

All external connections to possible accessories are made to terminals on

the connection box (chapter 7.2).

7.1 Main circuit board layout

The SAVE VTC 700 is equipped with built-in regulation and internal wiring.

Fig. 6 Main circuit board connections

254492 | v01