SAVE VTC 700 SERVICE AND ACCESSORIES INSTALLATIONV1

32
|
Accessories
Electrical reheater is used for supply air heating during cold outside temperatures. Electrical reheater should be installed
inside of the unit.
• ELH — Electrical heater
• OHT — overheat protection sensor
• 1 — Outdoor air
• 2 — Supply air
• 3 — Extract air
• 4 — Exhaust air
Component/product — Article number:
• Reheater VTC 700 R (for right version model) — 138200
• Reheater VTC 700 L (for left version model) — 137746
Installation and connection
1 Remove the cover of reheater by loosening screws at the front (pos. 1).
2 Remove 4 knobs in the reheater compartment (pos.
1), they will be used to hold the reheater in place.
Remove the main circuit board cover plate by remov-
ing 2 screws (pos. 2) in the lower front edge of the
plate.
| v01