SAVE VTC 500 INSTALLATIONV01 20210316

8
| Installation
Make sure the mounting bracket is completely level.
Connect the condensate drainage to the 2 drain plugs in the bottom of the unit. Make sure to use correct drain traps on
both connections. The height (H) must be at least 60 mm. Drain traps are not included on delivery and can not be ob-
tained from Systemair.
Note:
Remove caps from the drainage holes inside the unit.
6.1 Ventilation Duct Connection and Insulation
Important
• Always cover the ventilation ducts during construction period.
• Make sure there are no loose objects or impurities inside the ducts.
Install the ducts, supply air diffusers and air intake grilles as shown in the ventilation drawing.
254488 | v01