SAVE VTC 500 SERVICE AND ACCESSORIES INSTALLATIONV01 20210316

32
|
Accessories
Electrical reheater is used for supply air heating during cold outside temperatures. Electrical reheater should be installed
inside of the unit.
• ELH — Electrical heater
• OHT — overheat protection sensor
• 1 — Outdoor air
• 2 — Supply air
• 3 — Extract air
• 4 — Exhaust air
Component/product — Article number:
• ELH VTC 500 R — 158105
• ELH VTC 500 L — 158109
Installation and connection
1 Remove the cover of reheater by loosening screws at the front (pos. 1).
2 Remove knobs (pos. 2) that will hold reheater in
place. Insert electrical reheater (pos. 1) into dedicated
compartment, secure reheater with previously re-
moved knobs (pos. 2).
3 Lead reheater control, TRIAC and overheat protection
sensor wires through separate holes in the panel (pos.
3) to electrical connections compartment.
| v1.1