SAVE VTR 500 SERVICE AND ACCESSORIES INSTALLATIONV1

26
|
Service
4.3.1.9 Overheat protection reset button
Fig. 6 Overheat protection reset button
If the supply air temperature is low, it can indicate that the over heat protec-
tion is triggered. The overheat protection can be reset by pressing the reset
button (1).
4.4 Electrical connections
Fig. 7 Print card position
The SAVE VTR 500 is wired internally from factory.
The electrical connection box can be found on the supply air outlet side of the
unit behind a cover plate. The print card (1) can easily be taken out from the
unit.
4.4.1 Main circuit board layout
The SAVE VTR 500 is equipped with built-in regulation and internal wiring.
| v01