SAVE VTR 100B INSTALLATIONV1
Table Of Contents
- 1 Overview
- 2 Important Safety Information
- 3 Technical Data
- 4 Delivery, Transport, Storage
- 5 Prerequisites for Installation
- 6 Connection box installation and switching orientation from Right-hand to Left–hand
- 7 Installation
- 8 Electrical connections
- 9 Before Starting the System
- 10 Commissioning
- 11 Concluding Routines
- 12 Disposal and recycling
- 13 EU Declaration of Conformity
20
| Electrical connections
7.6.3 Fitting the kitchen furniture panel as a door
Fig. 23 Kitchen furniture panel as a door
Another suggested option is to use hinges instead of
brackets and install the kitchen furniture panel as a
hinged cupboard door. Hinges or other needed parts for
this installation method are not included in the package.
8 Electrical connections
The SAVE VTR 100/B is wired internally from factory.
The electrical connection box can be found on the exhaust air outlet side of the unit. The print card can easily be taken
out from the unit, without using tools.
Fig. 24 Main circuit board position
8.1 Main circuit board layout
The SAVE VTR 100/B is equipped with built-in regulation and internal wiring.
254537 | v2