SAVE VTR 100B INSTALLATIONV1
Table Of Contents
- 1 Overview
- 2 Important Safety Information
- 3 Technical Data
- 4 Delivery, Transport, Storage
- 5 Prerequisites for Installation
- 6 Connection box installation and switching orientation from Right-hand to Left–hand
- 7 Installation
- 8 Electrical connections
- 9 Before Starting the System
- 10 Commissioning
- 11 Concluding Routines
- 12 Disposal and recycling
- 13 EU Declaration of Conformity
Installation |
17
7.5 Wiring and configuration
Fig. 17 Connection of the cooker hood
Connect control signal wires from the cooker hood to UI2
and 24 V on the external connection board (figure 17).
For more information about connection board see 8.2 Ex-
ternal connections (Connection board), page 21.
Note:
UI2 default configuration: Cooker hood
7.6 Installation of a kitchen furniture panel
The kitchen furniture panel can be mounted directly on the unit, sides of cabinets or installed as a door. Parts for panel
installation directly on the unit and sides are delivered with the unit.
7.6.1 Mounting the kitchen furniture panel directly on the unit
Fig. 18 Top view
Depending on the kitchen cupboard depth, the unit might
have to be shifted forward for the panel to be aligned
with the cupboards.
Number Explanation
1
Wall or any other mounting surface
2
Wood block (if needed, 25–100 mm)
3
SAVE VTR 100/B
4
Adjustable bolts (15–25 mm)
5
Kitchen furniture panel (P)
Adjust bolts if shifting distance is less than 25 mm or use wood blocks in case the required distance is greater.
Fig. 19 Installation of bolts
254537 | v2