SAVE VTR 100B INSTALLATIONV1
Table Of Contents
- 1 Overview
- 2 Important Safety Information
- 3 Technical Data
- 4 Delivery, Transport, Storage
- 5 Prerequisites for Installation
- 6 Connection box installation and switching orientation from Right-hand to Left–hand
- 7 Installation
- 8 Electrical connections
- 9 Before Starting the System
- 10 Commissioning
- 11 Concluding Routines
- 12 Disposal and recycling
- 13 EU Declaration of Conformity
Installation |
13
7.3 Installation with 251-10/B cooker hood
Fig. 10 Installation of the cooker hood
Product name and number
• 251-10/B White Cookerhood – 96698
• 251-10/B Stainless Cookerhood – 96699
Before hanging the ventilation unit on the wall, the cook-
er hood must be mounted on the wall or in the cabinet,
as the cooker hood power and control cables must be
routed to the top and the already installed ventilation unit
will block access.
Follow instructions delivered with the cooker hood how
to prepare it before installation.
1. Use mounting mechanism which is delivered together
with the cooker hood (figure 10, pos. X).
Pull the cooker hood power supply and control cables
to the top since the mounted SAVE VTR 100/B unit will
block access to the back.
Fig. 11 Placing the unit on the mounting bracket (the cooker hood is not shown)
2. Once all cooker hood cables at the back are led to the top, lift the unit and hang it on the mounting bracket.
Warning
Beware of sharp edges during mounting and maintenance. Use protective gloves.
Consider the unit weight when mounting!
3. Connect the cooker hood to the unit via a flexible duct.
Note:
Make sure that the unit is completely vertical and horizontal once mounted on the wall. Check with a spirit
level.
Make sure there is at least 2 mm gap between the unit and the cupboard to prevent vibration noises.
7.4 Installation with 392–10/B cooker hood
Product name and number
• 392-10/B Slimline — 77265
254537 | v2