SAVE VTR 100B INSTALLATIONV1
Table Of Contents
- 1 Overview
- 2 Important Safety Information
- 3 Technical Data
- 4 Delivery, Transport, Storage
- 5 Prerequisites for Installation
- 6 Connection box installation and switching orientation from Right-hand to Left–hand
- 7 Installation
- 8 Electrical connections
- 9 Before Starting the System
- 10 Commissioning
- 11 Concluding Routines
- 12 Disposal and recycling
- 13 EU Declaration of Conformity
8
| Connection box installation and switching orientation from Right-hand to Left–hand
1 Unscrew the connection box mount plate and a cover
plate on the other side of the unit. These plates have
to be swapped. A cable can be found under the cover
plate. Lead a cable through a hole in the connection
box mount plate. It will be used to connect the con-
nection box to the unit. (figure A)
2 Unscrew the mounting bracket. It has to be installed
on the other side cover (figure B).
3 Rotate the mounting bracket, use previously removed
screws and washers to install bracket on the cover
(figure C).
4 Insert the connection box into the mount plate and
connect the cable. The unit can now be mounted from
the other side (left version).
254537 | v2