400896 Topvex FR Installation Instructions

Installation instructions

Systemair Inc.

Topvex FR800, FR1600, FR3800

Double mounting brackets (pos. 1 and 2, gure 10) are used for Topvex FR1600-3800 to ensure a stable t.

Topvex FR800 have single brackets (pos. 1).

Fig. 10 Mounting brackets

Connect the unit electrically to the main power

through the all pole circuit breaker (safety switch),

which is enclosed inside the unit on delivery. The

wiring is led through the side of the unit electrical

connection.

Warning

The unit’s electrical connection to the main

power supply must be preceded by an all pole

circuit breaker with a minimum 0.1” (3 mm) gap.

Danger

• Make sure that the main power supply to the

unit is disconnected before performing any

maintenance or electrical work!

• All electrical connections must be carried out

by an authorized installer and in accordance

with local rules and regulations.

1 Warnings

The following admonitions will be presented in the different sections of the document.

Danger

• Make sure that the Mains supply to the unit is disconnected before performing any maintenance or

electrical work!

• All electrical connections must be carried out in accordance with local rules and regulations.

Warning

• In order for the unit to be considered safely installed the doors if equipped with handles have to be

locked with a key to prevent unauthorized or accidental opening

• The unit must be duct connected or in some other way provided with protection so that it is not

possible to come in contact with the fans through the duct connections

• The unit is heavy. Be careful during transport and mounting. Risk of injury through pinching. Use

protective clothing.

• Beware of sharp edges during mounting and maintenance. Make sure that a proper lifting device is

used. Use protective clothing.

Caution

• If the unit is installed in a cold place make sure that all joints are covered with insulation, and tape well

• Duct connections/duct ends should be covered during storage and installation

• Do not connect tumble dryers to the ventilation system

• Take care not to damage the water battery when connecting water pipes to connectors. Use a

spanner to tighten the connection.

Topvex FR03, FR06, FR08, and FR11

Installation instructions

206638

Systemair AB