CORRIGO VENTILATION 3.X USER GUIDE
Table Of Contents
- About this user guide
- About Corrigo
- Display, buttons and LEDs
- The menu system
- Navigating the menus
- Running mode
- Temperature
- Setpoint Supply air temperature control
- Setpoint Outdoor temperature compensated Supply air control
- Setpoint Cascaded room temperature control
- Setpoint Cascaded extract air temperature control
- Setpoint Outdoor compensated room temperature/extract air control
- Support control heating/Support control cooling
- Frost protection temperature
- Exchanger de-icing
- Heat exchanger efficiency monitoring
- Recirculation
- Extra controller unit
- Enthalpy control
- Air control
- Pressure control SAF (there are also corresponding menus for EAF)
- Flow control SAF (there are also corresponding menus for EAF)
- Manual frequency control SAF (there are also corresponding menus for EAF)
- Frequency control external
- Frequency control SAF with EAF slave/flow control (also available for opposite function)
- CO2
- Humidity control
- Time settings
- Access rights
- Other functions
- Index
The menu system Corrigo ventilation user guide, revision F
10
Alarm events
Alarm log, containing the 40 latest alarm events. The
most recent event is listed first. The alarm log can only
be used for viewing the alarm history. Alarms are
handled in a special area, see the section Alarm
handling.
Inputs/Outputs
These menus show the current values for all configured
inputs and outputs.
These are read-only menus. No changes can be made
here.
Universal inputs can be configured as either analogue or digital inputs.
Analogue inputs and digital outputs are shown here as examples.
Analogue inputs/outputs
The current values for the analogue inputs and outputs
are shown here.
Digital inputs/outputs
This menu shows if the digital inputs and outputs are On
or Off.
24 Nov 14:32 B
Malfunction supply
air fan
Acknowledged
AI
DI
UI
AO
DO
AI1: 18.5 Outd temp
AI2: 20.3 Supply temp
AI3: 28.2 Frost prot
AI4: 19.9 Room temp1
DO1:Off SAF 1/1-speed
DO2:Off EAF 1/1-speed
DO3: On SAF 1/2-speed
DO4:Off EAF 1/2-speed