Corrigo ventilation 3.4 manu

Manual Corrigo Ventilation, revision R Chapter 17 Configuration 101
.No
Alarm text
Pri
Description
99
High temp extra sensor 5
-
High temperature extra sensor 5
100
Low temp extra sensor 5
-
Low temperature extra sensor 5
101
Extra alarm 1
Extra alarm 1 on digital input
102
Extra alarm 2
Extra alarm 2 on digital input
103
Extra alarm 3
Extra alarm 3 on digital input
104
Extra alarm 4
Extra alarm 4 on digital input
105
Extra alarm 5
Extra alarm 5 on digital input
106
Extra alarm 6
Extra alarm 6 on digital input
107
Extra alarm 7
Extra alarm 7 on digital input
108
Extra alarm 8
Extra alarm 8 on digital input
109
Extra alarm 9
Extra alarm 9 on digital input
110
Extra alarm 10
Extra alarm 10 on digital input
111
Extra unit in manual mode
Extra unit is in manual mode
112
Malfunction motor control 1
Malfunction motor control 1
113
Malfunction motor control 2
Malfunction motor control 2
114
Motor control 1 external
operation
Motor control 1 external operation
115
Motor control 2 external
operation
Motor control 2 external operation
17.29 Communication
17.29.1 Modbus communication
Corrigo can be connected to a network for Modbus communication.
Modbus
communication
slave, port 1
Not Active
If Modbus communication is activated, you can set the address etc.
Modbus communication takes place using 1 stop bit.
Modbus address: 1
Speed: 9600 bps
Two stop bits:Yes
Parity:No
NOTE: Only one stop bit can be used.
Slave
For connection to E tool
©
and a Modbus SCADA system.
Function port1 
Slave