SRC technical documentation (IOM SRC 01 1GB)

ON
OFF
A
AUTO
A
AUTO
05.02.2020
13:35
AutoAuto
StatutMode
Zone 1
Accueil
ON
OFF
A
AUTO
05.02.2020
13:35
18.5°C
Point de consigne
Haute
ArretFroid
Vitesse
StatutMode
Zone 1
Accueil
MANAUTO
ON
OFF
A
AUTO
05.02.2020
13:35
Occ.18.5°C
Présence
Point de
consigne
AutoArretAuto
VitesseStatutMode
Appareil 1 , Adresse 1
Accueil
MANAUTO
05.02.2020
13:35
Arret
Vitesse
Zone 1
Accueil
4 SRC
2. PRESENTATION
2.1. INTRODUCTION
The SRC HMI (Smart Remote Control) is a control interface for control systems. It has the advantage of being
a remote control system. The control can be centralized and is done either individually or by zone (unit
group). It can control up to:
² 31 units
² 15 separate zones
The SRC is used as a simple remote control. It controls a single type of device, whether alone or several
in a single zone:
² Fan convector unit only
 Fan convector unit (featuring SYSLOGIC control)
² Fan convector unit zone (featuring SYSLOGIC control)
² Heat pump on water circuit only (featuring POL423 or POL636 or POL638 control)
² Heat pump zone on water circuit (featuring POL423 or POL636 or POL638 control)
2.2. MINI-BMS
The SRC controls several devices of different types over several zones:
² Chillers and hot water production units
 Chiller A (SYSAQUA featuring POL423 or POL636 or POL638 control)
 Chiller B (SYSCROLL except SYSCROLL EVO 20-30)
² Air handling units (featuring Access Control)
² Fan convector units
 Fan convector unit A (featuring SYSLOGIC control)
 Fan convector unit B (featuring TCONTROLPOD control)
The SRC is used to act on the
following:
² operating mode
² unit status
The SRC is used to act on the
following:
² ventilation speed
The SRC is used to act on the
following:
² operating mode
² unit status
² ventilation speed
² ambient setpoint
The SRC is used to act on the
following:
² operating mode
² unit status
² ventilation speed
² ambient setpoint(s)
² in use/not in use
2.3. REMOTE CONTROL
2.4. FEATURES
2.4.1. CHILLERS AND HOT WATER
PRODUCTION UNITS
2.4.2. AIR HANDLING UNIT
2.4.3. FAN CONVECTOR UNIT 2.4.4. HEAT PUMP ON WATER CIRCUIT