SRC technical documentation (IOM SRC 01 1GB)

Communication fault
Device address 2
Device alarm
Device address 1
Active alarms
ON
OFF
A
AUTO
05.02.2020
13:35
Zone 1
Home
18.5°C
Setpoint
High
OFFCooling
Speed
StatusMode
2 active alarms
Factory reset
Change password
Zone devices
Zone name
Configure addresses
DIP Config.
Fan coil A
Fancoil type
µBMS
SRC type
Settings
1
0
987
654
321
Factory reset
Settings
Enter Service password
Cancel
OK
9201
Fan coil A
Fancoil type
µBMS
SRC type
2
1
Factory reset
Change password
Zone devices
Fancoil type
µBMS
SRC type
Settings
Factory reset
Cancel
OK
Do you really want to proceed?
1
No active alarms
No zones configured
Home
Factory reset
Change password
Zone devices
Zone name
Configure addresses
DIP Config.
Fan coil A
Fancoil type
µBMS
SRC type
Settings
1
0
987
654
321
Factory reset
Settings
Enter Service password
Cancel
OK
9201
Fan coil A
Fancoil type
µBMS
SRC type
2
1
0
987
654
321
Service level password
Confirm new password
Cancel OK
New password
Old password
Password is not correct
If you forget the new password, action by the after-sales service will be required.
Caution
29SRC
The SRC returns two different error messages:
² Defective unit
at least 1 alarm on the unit. It disappears
automatically as soon as the problem is
corrected.
² Communication error
no modbus communication
9. PASSWORD CHANGE
10. SRC RESET
This command resets the SRC. All created elds and addresses will be deleted, all the values displayed will
be the default parameters.
You can change the default password (9201).