SRC technical documentation (IOM SRC 01 1GB)

1/2
0.0°C
Ambient probe
18.5°C
Setpoint
Auto
Speed
OFF
Status
Cooling
Mode
Fan coil Address 1
2/2
0.0°C
Auxiliary probe
Fan coil Address 1
ON
OFF
A
AUTO
A
AUTO
05.02.2020
13:35
AutoAuto
StatusMode
Zone 1
Home
ON
OFF
A
AUTO
A
AUTO
05.02.2020
13:35
Zone 1
Home
Load shedding
Night
Cancel OK
ON
OFF
Auto
Status
1
2
ON
OFF
A
AUTO
A
AUTO
05.02.2020
13:35
Zone 1
Home
Auto
Cancel OK
Heating
Cooling
Mode
1
2
ON
OFF
A
AUTO
A
AUTO
05.02.2020
13:35
AutoAuto
StatusMode
Zone 1
Home
0.0°C
Leaving water temperature
0.0°C
Return water temperature
Auto
Status
Auto
Mode
Chiller Address 1
25SRC
The SRC can act individually, like a remote control on:
² operating mode
² unit status
² ventilation speed
² ambient setpoint
It is also possible to check the different temperatures
measured by the:
² ambient temperature sensor
² auxiliary probe
7.2. CHILLERS AND HOT WATER PRODUCTION UNITS
7.2.1. CHILLER A
The SRC is used to act for all the devices in the zone on the following:
² operating mode ² unit status
The SRC can act individually, like a remote control on:
² operating mode
² unit status
It is also possible to check the different temperatures measured by the:
² water return sensor
² water ow sensor