SRC technical documentation (IOM SRC 01 1GB)
21.0°C
08:00
4321
Copy
Setpoint
Speed
Satus
Mode
Start
Stage 1
OFF
Cooling
Time range active
Time range
Days Week Weekend
Scheduling
Zone 1
1
21.0°C
08:00
4321
Copy
Setpoint
Speed
Satus
Mode
Start
Stage 1
OFF
Cooling
Time range active
Time range
Days Week Weekend
Scheduling
Zone 1
2
21.0°C
Copy
Setpoint
Days Week Weekend
Scheduling
Zone 1
Auto
Cooling
Cancel OK
Heating
OFF
Mode
1
2
21.0°C
4321
Copy
Setpoint
Speed Low
Time range
Days Week Weekend
Scheduling
Zone 1
Cancel OK
OFF
ON
Status
1
2
21.0°C
08:00
4321
Copy
Setpoint
Speed
Satus
Mode
Start
Stage 1
OFF
Cooling
Time range active
Time range
Days Week Weekend
Scheduling
Zone 1
3
21.0°C
08:00
4321
Copy
Setpoint
Speed
Satus
Mode
Start
Stage 1
OFF
Cooling
Time range active
Time range
Days Week Weekend
Scheduling
Zone 1
4
21.0°C
Copy
Setpoint
Days Week Weekend
Auto
Stage 3
Cancel OK
Stage 2
Stage 1
Speed
1
Scheduling
Zone 1
2
21.0°C
16.0 ... 30.0
21.0°C
Copy
Setpoint
Days Week Weekend
Scheduling
Zone 1
OKCancel
Setpoint
2
1
20 SRC
6.2.2. FAN CONVECTOR UNIT B
The SRC programming makes it possible to dene:
² operating mode
Off
Heat
Cool
Auto
² unit status
On
Off
² ventilation speed
Stage 1
Stage 2
Stage 3
Auto
² the BMS setpoint
The setting of the ambient setpoint depends:
² on the BMS setpoint (SRC)
² on the TCONTROLPOD control setpoint.
If the user changes the setpoint locally using the TCONTROLPOD remote control, then there is a ΔT between
the setpoint set on the SRC and the one requested by the TCONTROLPOD control. This ΔT will be kept for a
change of setting on the SRC.