SRC technical documentation (IOM SRC 01 1GB)


i
System preferences
Unit information
Settings
Alarms
Scheduling
Air handling unit
Chiller
Fan coil
Menu
Cancel OK
Zone 7
Zone 6
Zone 5
Zone 4
Zone 3
Zone 2
Zone 1
Zone
1
2
21.0°C
08:00
4321
Copy
Setpoint
Speed
Satus
Mode
Start
Low
OFF
Cooling
Time range active
Time range
Days Week Weekend
Scheduling
Zone 1
21.0°C
08:00
4321
Copy
Setpoint
Speed
Satus
Mode
Start
Low
OFF
Cooling
Time range active
Time range
Days Week Weekend
Scheduling
Zone 1
21.0°C
08:00
4321
Copy
Setpoint
Speed
Satus
Mode
Start
Low
OFF
Cooling
Time range active
Time range
Days Week Weekend
Scheduling
Zone 1
21.0°C
08:00
4321
Copy
Setpoint
Speed
Satus
Mode
Start
Low
OFF
Cooling
Time range active
Time range
Days Week Weekend
Scheduling
Zone 1
21.0°C
08:00
4321
Copy
Setpoint
Speed
Satus
Mode
Start
Low
OFF
Cooling
Time range active
Time range
Days Week Weekend
Scheduling
Zone 1
21.0°C
00:08
Copy
Setpoint
Low
Days Week Weekend
Scheduling
Zone 1
OKCancel
Start
2
1
The time programming of the ranges must be chronological. Otherwise, the SRC will malfunction.
Caution
18 SRC
6. HOURLY PROGRAMMING
The SRC allows the operating parameters to be programmed by zone.
It is possible to program weekdays and weekends differently.
For each programming group, 4 time slots are available.
For each time slot, it is possible to set the time from which the operating
parameters will be applied. It is also necessary to enable or disable this
time slot.
6.1. GENERAL
When creating or modifying a program, the SRC immediately applies the setting of the range that is active
at that time.
Example:
Time: 2:30 PM
T1 active at 8:00 AM
T1 active at 12:00 noon
T3 active at 6:00 PM
T4 active at 10:00 PM
The SRC applies the programming of the T2 range.
Inactive range
Active range