SRC technical documentation (IOM SRC 01 1GB)

Cancel OK
Zone 7
Zone 6
Zone 5
Zone 4
Zone 3
Zone 2
Zone 1
Zone
1
2
Factory reset
Change password
Zone devices
Zone name
Configure addresses
DIP Config.
Fan coil A
Fancoil type
µBMS
SRC type
Settings
4
+
Zone 1
Fan coil, Address 5
Chiller A, Address 4
Cancel OK
Air handling unit, Address 3
Fan coil, Address 2
Chiller A, Address 1
Zone devices
1
2
+
Zone 1
Release
Chiller A, Address 1
+
Zone 1
Release
Chiller A, Address 1
1
+
+
Zone 1
Release
Chiller A, Address 1
Chiller A, Address 4
Cancel OK
Zone devices
1
2
Zone 1
Release
Chiller A, Address 4
Release
Chiller A, Address 1
Cancel OK
Zone 7
Zone 6
Zone 5
Zone 4
Zone 3
Zone 2
Zone 1
Zone
1
2
+
Zone 1
1
+
Zone 2
1
Zone 2
Fan coil, Address 5
Cancel OK
Air handling unit, Address 3
Fan coil, Address 2
Zone devices
2
+
Zone 2
Release
Fan coil, Address 2
Cancel OK
Zone 7
Zone 6
Zone 5
Zone 4
Zone 3
Zone 2
Zone 1
Zone
1
Each zone can only have one type of device. For fan convector unit zones, the conguration of the
Dips or the motor type must be identical.
Caution
Information
Access to the different zones is done by scrolling vertically. The SRC has 15
zones.
13SRC
5.1.4. ZONE CREATION
After selecting the desired area, add and remove the available devices:
² Chillers
² Terminal units
² Air handling units