SRC technical documentation (IOM SRC 01 1GB)

Factory reset
Change password
Zone devices
Zone name
Configure addresses
DIP Config.
Fan coil A
Fancoil type
µBMS
SRC type
Settings
3
TUs DIP Config.
1
Address 1
1
Address 2
1
1 ... 7
1
TUs DIP Config.
Address 1
OKCancel
DIP Config.
2
1
TUs DIP Config.
1
Address 1
3
Address 2
TUs DIP Config.
1
Address 1
1
Address 2
2
1 ... 7
3
TUs DIP Config.
Address 1
OKCancel
DIP Config.
2
1
Factory reset
Change password
Zone devices
Zone name
Configure addresses
Model
Fan coil B
Fancoil type
µBMS
SRC type
Settings
3
TUs Model
AC
Address 1
AC
Address 2
1
TUs Model
AC
Address 1
Address 2
Cancel OK
EC
AC
Model
1
2
TUs Model
EC
Address 1
AC
Address 2
321
ON
321
ON
321
ON
321
ON
321
ON
321
ON
321
ON
12 SRC
5.1.3. FAN CONVECTOR UNIT CONFIGURATION
5.1.3.1. FAN CONVECTOR UNIT A
5.1.3.2. FAN CONVECTOR UNIT B
The SRC must be set up according to the conguration of the fan convector units.
Type A fan coils are equipped with SYSLOGIC control. This electronic card has a DIP switch to dene the
characteristics of the machine There are 7 possible congurations:
Type B fan convector units feature TCONTROLPOD control. This electronic board is specic according to the
type of motor equipping the unit:
² AC
² EC
1. 2 tubes with valve
Cooling only
2. 2 tubes with valve
Reversible/change over
3. 2 tubes with valve
Heating only
4. 2 tubes without valve
Reversible/change over
5. 4 tubes with valve
Cooling/Heating
6. 2 tubes with valve and electric
heating
Cooling/Heating
7. 2 tubes with valve and electric
heating
Reversible/change over