SRC technical documentation (IOM SRC 01 1GB)


i
System preferences
Unit information
Settings
Alarms
Scheduling
Air handling unit
Chiller
Fan coil
Menu
Factory reset
Change password
Zone devices
Zone name
Configure addresses
DIP Config.
Fan coil A
Fancoil type
µBMS
SRC type
Settings
Factory reset
Settings
Zone of water source heat pump
Single water source heat pump
Cancel OK
Zone of fan coils (A)
Single fan coil (A)
µBMS
SRC type
1
SRC type
2
0
987
654
321
Factory reset
Settings
Enter Service password
Cancel
OK
9201
Fan coil A
Fancoil type
µBMS
SRC type
2
1
Information
To make it easier to identify the elds when using the SRC, it is possible to name each of the zones.
10 SRC
5. CONFIGURATION OF THE CONTROL TYPE
The choice of control system is made in the Parameter menu. Access is password protected (9201 by
default)
With the Mini BMS option, the SRC allows you to group and manage several types of units by zones:
² Chillers and hot water production units
² Air handling units
² Fan convector units
For the other options, the SRC considers the network as a single zone in which only one type of machine is
present:
² Fan convector units featuring SYSLOGIC control
² Heat pump on water circuit
5.1. MINI-BMS
The conguration must be carried out according to the following process:
1. address conguration
2. choice of the control type used on the fan convector units
3. denition of the fan convector unit conguration
 Conguration dip switch (SYSLOGIC control)
 AC motor (TCONTROLPOD control)
 EC motor (TCONTROLPOD control)
4. zone creation