SRC technical documentation (IOM SRC 01 1GB)

8
Active mode back light
2
Sleep mode back light
10 min
Sleep mode timeout
Display settings
1 ... 60
min10
OKCancel
Sleep mode timeout
Sleep mode timeout
Display settings
2
1
2
OKCancel
Sleep mode back light
Sleep mode timeout
Display settings
2
1
8
OKCancel
Active mode back light
Sleep mode timeout
Display settings
2
1
Display settings
HMI termination
None
Clock sync. source
Example 13.00
Use 24 hours time format
05.02.2020 13:35:20
Unit date and time
English
Unit language
System preferences
Display settings
HMI termination
Chiller B, Address 2
Clock sync. source
Example 13.00
Use 24 hours time format
05.02.2020 13:35:20
Unit date and time
English
Unit language
System preferences
Display settings
HMI termination
Chiller B, Address 2
Clock sync. source
Example 13.00
Use 24 hours time format
05.02.2020 13:35:20
Unit date and time
English
Unit language
System preferences
Information
Setting “0” for standby brightness turns off the SRC screen. Simply tapping on the screen brings the
SRC out of this mode.
9SRC
4.2. DISPLAY SETTING
This menu allows you to manage the screen brightness when it is active or in
standby mode. It is also possible to set the standby time.
4.3. INTERFACE RESISTOR
The SRC is equipped with a 120 ohm terminating resistor. By default, the end of line resistor is activated. It
can be deactivated directly via the “Preferences” screen.