UM AER 01 N 1GB
Table Of Contents
- CONTENTS
- 1. INTRODUCTION
- 2. INPUTS/OUTPUTS DESCRIPTION
- 3. ROOM AIR TEMPERATURE CONTROL
- 3.1. SUMMER/WINTER SWITCHING
- 3.2. UNIT ON/OFF
- 3.3. COMPRESSOR CONTROL
- 3.4. DEFROST MODE
- 3.5. MAIN FAN
- 3.6. TEMPERATURE-BASED FREECOOLING AND FREEHEATING CONTROL
- 3.7. THREE DAMPERS ECONOMIZER OPTION
- 3.8. Supply air temperature minimum limit
- 3.9. FRECO OPTION
- 3.10. THERMODYNAMIC RECOVERY OPTION - TRECO
- 3.11. AUXILIARY HEATING
- 3.12. Set point compensation
- 4. ROOM AIR QUALITY CONTROL
- 5. SMOKE DETECTOR
- 6. SCHEDULING
- 7. USER INTERFACE
- 8. ALARM MANAGEMENT
- 9. SERVICING (CAREL)
- 10. MENU DESCRIPTION (CAREL)
English
Information
Power outage lasting longer than 8 days will lead to a loss of the time setting. It is important to set
the unit back to the right time after such an event.
10.36
0.1
Controler BSP
App. version
1/2Versions
Enabled
IPErr
IPErr
Advanced
SZEFRW-HNJ5G-RZHH3-RFA7Z-6W
+Activation key
Enable
Cloud server
Communication
+State
1/7Cloud
3162191970
169.254.011.064
+
1/2Ethernet
Cloud
Ethernet
1/2Communication overview
Français
Deutsch
English
1/3
English
Français
English
SMS language
+Modem
Save -> SD
+Alarm-snapshot
HMI Language
1/5Language selection
10:40:05
Versions
Communications
Language selection
03.02.2016
1/4Commissioning
Access
Services
Commissioning
Status
1/4Main Menu
Auto
Auto
10:40:0503.02.2016
1/6
Reduced mode
Water Law
Auto change over
Glycolconcentr.
Communications
Language selection
Commissioning
Auto
Auto
10:40:0503.02.2016
1/6
Reduced mode
Water Law
Auto change over
Glycolconcentr.
Communications
Language selection
Commissioning
10.36
0.1
Controler BSP
App. version
1/2Versions
Enabled
IPErr
IPErr
Advanced
SZEFRW-HNJ5G-RZHH3-RFA7Z-6W
+Activation key
Enable
Cloud server
Communication
+State
1/7Cloud
3162191970
169.254.011.064
+
1/2Ethernet
Cloud
Ethernet
1/2Communication overview
Français
Deutsch
English
1/3
English
Français
English
SMS language
+Modem
Save -> SD
+Alarm-snapshot
HMI Language
1/5Language selection
10:40:05
Versions
Communications
Language selection
03.02.2016
1/4Commissioning
Access
Services
Commissioning
Status
1/4Main Menu
10.36
0.1
Controler BSP
App. version
1/2Versions
Enabled
IPErr
IPErr
Advanced
SZEFRW-HNJ5G-RZHH3-RFA7Z-6W
+Activation key
Enable
Cloud server
Communication
+State
1/7Cloud
3162191970
169.254.011.064
+
1/2Ethernet
Cloud
Ethernet
1/2Communication overview
Français
Deutsch
English
1/3
English
Français
English
SMS language
+Modem
Save -> SD
+Alarm-snapshot
HMI Language
1/5Language selection
10:40:05
Versions
Communications
Language selection
03.02.2016
1/4Commissioning
Access
Services
Commissioning
Status
1/4Main Menu
10.36
0.1
Controler BSP
App. version
1/2Versions
Enabled
IPErr
IPErr
Advanced
SZEFRW-HNJ5G-RZHH3-RFA7Z-6W
+Activation key
Enable
Cloud server
Communication
+State
1/7Cloud
3162191970
169.254.011.064
+
1/2Ethernet
Cloud
Ethernet
1/2Communication overview
Français
Deutsch
English
1/3
English
Français
English
SMS language
+Modem
Save -> SD
+Alarm-snapshot
HMI Language
1/5Language selection
10:40:05
Versions
Communications
Language selection
03.02.2016
1/4Commissioning
Access
Services
Commissioning
Status
1/4Main Menu
10.36
0.1
Controler BSP
App. version
1/2Versions
Enabled
IPErr
IPErr
Advanced
SZEFRW-HNJ5G-RZHH3-RFA7Z-6W
+Activation key
Enable
Cloud server
Communication
+State
1/7Cloud
3162191970
169.254.011.064
+
1/2Ethernet
Cloud
Ethernet
1/2Communication overview
Français
Deutsch
English
1/3
English
Français
English
SMS language
+Modem
Save -> SD
+Alarm-snapshot
HMI Language
1/5Language selection
10:40:05
Versions
Communications
Language selection
03.02.2016
1/4Commissioning
Access
Services
Commissioning
Status
1/4Main Menu
34 SysAer
7.8.4.3. COMMISSIONING MENU
Limited access with the "Installer" or "Maintenance".
Start by conguring the date and time.
To do so, switch to the "Installer" or "Maintenance" prole in the "Installation" section. The rst line of the
menu is used to set the date and time.
The date and time line will appear as highlighted.
Press the "Enter" button
to activate the change in date.
The
and buttons are used to change the highlighted setting.
Press once on the
button to approve the dened value and move on
to the next setting.
7.8.4.3.1. TIME SETTINGS
Select the languages required according to the application.
7.8.4.3.2. LANGUAGE SETTINGS
ETHERNET
The Ethernet conguration screen congures the various
parameters of the SysAer to connect to a corporate network.
IP communication enables a connection to the SysAer from
a computer found on the same network. This connection sets
up a remote access to the user interface.
CLOUD
Only the communication protocols available in the conguration of your SysAer will appear in the
communication conguration menu.
This menu can activate or deactivate the Cloud service as well as view the status.
7.8.4.3.3. COMMUNICATION PROTOCOLS SETTINGS