EDM SYSHP MINI DCI

≥1000mm
59
Figure 3-2.1: Hosng the unit
2 Installaon
2.1 Acceptance and Unpacking
Notes for installers

 When units are delivered check whether any damage occurred during shipment. If there is damage to the surface or
outside of a unit, submit a wrien report to the shipping company.
 Check that the model, specicaons and quanty of the units delivered are as ordered.
 Check that all accessories ordered have been included. Retain the Owner’s Manual for future reference.
2.2 Hoisng
Notes for installers

 Do not remove any packaging before hoisng. If units are not packaged or if the packaging is damaged, use suitable
boards or packing material to protect the units.
 Hoist one unit at a me, using two ropes to ensure stability.
 Keep units upright during hoisng, ensuring that the angle to the vercal does not exceed 30°.
The hook and barycenter of the
unit should be on a line in vercal
direcon to prevent improper
inclinaon
Make the rope go through the
liing holes from both the right and
le sides in the wooden collet