SYSTEMP Engineering Data Manual (EDM SYSTEMP S 7GB)

|
SysTemp G
16
Available accessories
Direct expansion:
Brushless DC compressors with inverter regulation and integrated oil separator
Power supply line for remote condenser
Power supply line with speed regulator for remote condenser
Condensing regulation with 0-10V signal for remote condenser with EC fans
LAC Valve for operation with low temperature outside air with remote condenser
Water-cooled condenser
Water-cooled condenser with a condensing temperature control valve
Chilled water:
Three-way control valves
Inlet and outlet water temperature sensors
Energy valve kit
Heating:
Low thermal inertia electric heaters with stage control
Low thermal inertia electric heaters with modulating control (available on selected models only)
Hot water heating coils with 2- or 3-way control valve (available on selected models only)
Humidification:
Room humidity probe
Supply humidity probe
Immersed electrodes humidifier
Mechanical and structural:
Condensate drain pump
Condensate and humidifier drain pump
Supply overpressure relief damper
M5 efficiency class intake air filter (EU5)
Front or rear intake plenum
Free-cooling air plenum with modulating dampers (UGA series only)
Ventilated stand with panelling for front or rear supply
Ventilated stand with panelling for bottom supply (installation on the raised floor)
Panels with sandwich counter-panelling
Panels with reinforced acoustic lining
Electrical:
Alternative voltages available: 460V/3ph/60Hz - 380V/3ph/60Hz - 230V/3ph/60Hz
Electrical supply line without neutral
Automatic transfer switch (ATS), Basic version
Automatic transfer switch (ATS), Advanced version
Regulation:
Constant air flow control
Constant pressure control
Local network set up and connection cable
User terminal for remote installation
Flooding detection system