SYSTEMP brochure

2727
SysTemp R
SysTemp G
HIGH
Density
> 20 kW/rack
Medium-density data centers are normally
configured according to the hot/cold aisle
design and adding localised “in-row” air
conditioning units.
This type of system involves the use of pe-
rimetral units which, through a raised floor,
convey air into the “cold aisle”. The air
heated by racks will then be collected by
hot aisles.
“In-row” units allow you to add a localised
temperature control, which eliminates
“hot-spot” problems.
This solution is optimal both if an existing
data center is expanded, and for the opti-
misation of loads in newly implemented
data centers.
High-density data centers are normally con-
figured according to the hot/cold aisle par-
titioning design, with any localised, “in-row”
air conditioning units.
This type of system involves the use of
high-efficiency perimetral units, with ven-
tilation being installed in the raised floor.
The rack aisles (hot or cold) are partitioned
to prevent hot and cold water from being
mixed and obtain homogeneous distribution
on the servers. “In-row” units allow you to
add a localised temperature control, which
eliminates “hot-spot” problems.
This solution allows you to optimise air distri-
bution and maximize the system energy ef-
ficiency, avoiding energy waste due to mixing
hot and cold air in the upper part of the racks.
Solutions for data centers
|