SYSTEMP brochure

|
SysTemp G
20
Available accessories
Direct expansion
•
Brushless DC compressors with inverter regulation and
integrated oil separator
•
Power supply line for remote condenser
•
Power supply line with speed regulator for remote
condenser
•
Condensing regulation with 0-10V signal for remote
condenser with EC fans
•
LAC Valve for operation with low temperature outside
air with remote condenser
•
Water-cooled condenser
•
Water-cooled condenser with a condensing
temperature control valve
Chilled water
•
Three-way control valves
•
Inlet and outlet water temperature sensors
•
Energy valve kit
Heating
•
Low thermal inertia electric heaters with stage control
•
Low thermal inertia electric heaters with modulating
control (available on request on selected models only)
•
Hot water heating coils with 2- or 3-way control valve
(available on request on selected models only)
Humidication
•
Room humidity probe
•
Supply humidity probe
•
Immersed electrodes humidifier
Mechanical and structural
•
Condensate drain pump
•
Condensate and humidifier drain pump
•
Supply overpressure relief damper
•
M5 efficiency class intake air filter (EU5)
•
Front or rear intake plenum
•
Free-cooling air plenum with modulating dampers (UGA
series only)
•
Ventilated stand with panelling for front or rear supply
•
Ventilated stand with panelling for bottom supply
(installation on the raised floor)
•
Panels with sandwich counter-panelling
•
Panels with reinforced acoustic lining
Electrical
•
Alternative voltages available: 460V/3ph/60Hz -
380V/3ph/60Hz - 230V/3ph/60Hz
•
Electrical supply line without neutral
•
Automatic transfer switch (ATS), Basic version
•
Automatic transfer switch (ATS), Advanced version
Regulation
•
Constant air flow control
•
Constant pressure control
•
Local network set up and connection cable
•
User terminal for remote installation
•
Flooding detection system