SYSTEMP brochure

Technological innovations
|
99
ON 100% ON 100% STAND BY
ON 60% ON 60% ON 60%
ON 100% STAND BY
ON 60% ON 60%
Smart Net
The intelligent local network
The units of the SysTemp close control air conditioning
range are equipped with an innovative control system in a
local network (LAN) which allows them to be managed and
serviced more easily while improving operational safety.
Active distribution of workload
The innovative Smart Net system allows the concept of
local network to be revolutionized. Taking advantage of
the modulation capabilities of its components, this system
makes it possible to actively share the workload among
all the units in the local network.
Compared to the latent redundancy Duty / Stand-by (n+1
or n+n) system, where the backup units were stationary
waiting for the onset of a problem, the Smart Net sys-
tem allows the units connected to the network to be kept
always active the Smart Net system allows the units to
work in unison to monitor thermo-hygrometric conditions
and air pressure, ensuring there are no "hot spots" due to
inactive units.
Efciency and energy saving
Thanks to the distribution of workload, system efciency
can be increased by partialising the request to the main
components such as fans, compressors, electric batteries
and humidiers.
This partialisation directly translates into an energy sav-
ing of up to 60% compared to redundant-type networks
(n+1 or n+n). Indeed, instead of having active units work-
ing at 100% of their performance while one or several
machines are stationary, the Smart Net system allows the
entire group of units to operate at 50 or 60% of the their
maximum load.
A safe and reliable network
The previous generation of latent redundancy systems
gave control to a single unit (Master), while the other
units were passive (Slaves). With a view to maximiz-
ing the safety of the units operating in the network, the
Smart Net system has been developed with a Smart Net
management logic. In the Smart Net system, each unit
is able to take control of the local network even if com-
munication among units is defective (broken or damaged
cable), or in the case of shutdown of one of the units.
Smart Net
DUTY / STAND-BY