IMO AW 450 EC SILEO DE,EN

Operating instructions
Fig. 2: Fan installed lying flat, cable routed in a U-shaped loop.
Fans installed upright
When routing the cable, make sure that the cable glands are located at
the bottom. The cables must always be routed downward.
Fig. 3: Cable routing for fans installed upright.
4.4 Factory settings
Factory settings made for the device by Systemair.
Mode PWM control
Group address 01
Fan/device address 01
Max. PWM / % 100
Min. PWM / % 0
Save set value to
EEPROM
No
Set value requirement Analog
Direction of action Positive (heating)