MA FRICO SIRE COMPETENT FUNCTIONS AC GB 160830

SIRe Competent Air Curtains
8
>Installer menu>Week program
Remove program
Check program
Change program
Tu e 10:45
00:00
Tu e 10:45
Change program
Tu e 10:45
Tu e Wed Thu Fri Sat SunMon
Tu e 10:45
Tu e Wed Thu Fri Sat SunMon
End
Tu e Wed Thu Fri Sat SunMon
1. 08:00
2. 18:00
3. 10:00
4. 16:00
Night
Day
Night
Day
>Installer menu>Week program
Change program
Check program
Remove program
Remove program
Reset all
Remove all
Remove single
>Installer menu>Week program
Check program
Week program on/off
New program step
>Installer menu>Week program
Week program on/off
•
ON
Installer status screen
Week program
Fan settings
>Installer menu
>Installer menu>Week program
Change program
New program step
Check program
Check program
Tu e Wed Thu Fri Sat SunMon
08:00
18:00
Day (1)
Night (2)
Check program
Tu e Wed Thu Fri Sat SunMon
08:00
18:00
Day (1)
Night (2)
Tu e 10:45
00:00
Tu e 10:45
>Installer menu>Week program
Check program
Week program on/off
New program step
New program step 7/16
Mode
Day
Tu e 10:45
Tu e Wed Thu Fri Sat SunMon
Tu e 10:45
Tu e Wed Thu Fri Sat SunMon
End
GB
A new program step does not replace a set
time for Day for example, but you can instead
select to change a program step.
To change a program step, select Change
program.
The program steps that should not apply
are removed in Remove program. One or all
program steps can be removed in the menu.
To return to the factory set basic program,
select Reset all.
Week program is activated by selecting On,
under Week program on/off. In On-mode,
a sun, moon or Off in the Status window
appears to indicate day, night respectively
Off-function.
Week program
Make settings for week program.
A basic program is pre-entered in SIRe.
Mon-Fri Day from 08:00, Night from 18:00
Sat Day from 10:00, Night from 16:00
Sun Day from 11:00:00, Night from 14:00
To check which program is set for a particular
day, select Check program and then switch
between the days using the rotary dial.
To check which days a certain program is
active, select a week day by pressing the
forward arrow, the program is marked and
those days that the program is used will be
underlined, switch between the programs for
a particular day using the rotary wheel.
To add program step, select New program
step. Confirm your selection with the forward
arrow. Select Day, Night or Off (if the unit
should not be in operation), set the time
for switch on and then for which days the
program applies, then go to End to finish.