SYSHP MINI EVO P – Installation Operation Manual (IOM SYSHP MINI EVO P S 1GB)
Table Of Contents
42
10) For smart grid:
The unit has smart grid function, there are two ports on PCB to
connect SG signal and EVU signal as following:
SMART GRID
1) SG=ON, EVU=ON.
If DHW mode is set available:
●The heat pump will operate in DHW mode firstly.
●TBH is set available, If T5<69℃,TBH will be turned on forcibly
(The heat pump and TBH can operate at the same time.); if T5
≥70℃, TBH will be turned off.(DHW=Domestic Hot Water, T5S
is the set water tank temperature.)
●TBH is set unavailable and IBH is set available for DHW mode,
as long as T5<59℃,IBH will be turned on forcibly(The heat
pump and TBH can operate at the same time.); if T5≥ 60℃, IBH
will be turned off.
2) SG=OFF, EVU=ON.
If DHW mode is set available and DHW mode is set ON:
●The heat pump will operate in DHW mode firstly.
●If TBH is set available and DHW mode is set ON, If T5＜
T5S-2，the TBH will be turned on ( The heat pump and IBH can
operate at the same time.); if T5≥T5S+3，the TBH will be
turned off.
●If TBH is set unavailable and IBH is set available for DHW
mode ,If T5＜T5S-dT5_ON, IBH will be turned on ( The heat
pump and IBH can operate at the same time.); if T5≥Min
(T5S+3,60), the IBH will be turned off.
3) SG=OFF, EVU=OFF.
The unit will operate normally
4) SG=ON, EVU=OFF.
Heat pump,IBH, TBH will be turned off immediately.
7
1211
109
18
8
7
5
2322 24
1 2
13
3
4
6
2014 15 17 1916 21
6 8 9
10
5
4321
CN4
CN22
CN5
CN13
CN15
CN18
CN28
S2
CN21
S1
S3
CN11
CN17
CN30
CN25
CN29
CN42
CN6
CN8
CN32
SW9
CN24
CN36
CN35
CN31
CN38
CN37
CN23
CN33
EVU SG
CN27
CN64
9) For remote shut down:
CLOSE: SHUT DOWN
7
1211
109
18
8
7
5
2322 24
1 2
13
3
4
6
2014 15 17 1916 21
6 8 9
10
5
4321
CN4
CN22
CN5
CN13
CN15
CN18
CN28
S2
CN21
S1
S3
CN11
CN17
CN30
CN25
CN29
CN42
CN6
CN8
CN32
SW9
CN24
CN36
M1 M2
CN35 CN31
CN38
CN37
CN23
CN33
CN27
CN64
CN19
CN19