SYSHP MINI EVO P – Installation Operation Manual (IOM SYSHP MINI EVO P S 1GB)

37
Port provide the control signal to the load.Two kind of control signal port:
Type 1：Dry connector without voltage.
Type 2：Port provide the signal with 220V voltage. If the current of load is <0.2A, load can connect to the port directly.
If the current of load is >=0.2A, the AC contactor is required to connected for the load.
unit 5-16kW
Type 1
9.6.6 Connection for other components
See 9.2.1for detailed port description.
CN11
Load
L N
FUSE
Type 2
ATCO
TCO
A2
7 5 3 1
A1
8 6 4 2
Power supply
Contactor
Load
CN11