DATASHEET MTP 10

MTP-X10K-NA
Potentiometer
DS-MTP-X10K-NA-EN-001 - 03 / 12 / 1915
www.sentera.eu
S.2.3.M.4
MTP-X10K-NA
Potentiometer
Key features
• Innitely variable control of the output voltage
• Stepless output voltage from 0 to Us by rotary button
• A switch (dry contact) for remote ON/OFF switching of external equipment
• A splashproof enclosure
• Inset or surface mounting
Technical specications
Supply (Us) max. 12 VDC / 1 mA
Output 0—Us
Switch contact rating
4 A / 250 VAC
10 A / 12 VDC
Protection standard IP44 / IP54 (according to EN 60529)
Ambient conditions
Temperature 0 — 5 0 ° C
Rel. humidity < 95 % rH (non-condensing)
Wiring and connections
Us Supply voltage (0—12 VDC)
+ Output voltage (0—Us)
- Ground
Dry contact for remote ON/OFF switching of external
equipment
Connections Cable cross section: max. 2,5 mm
2
Area of use
• A variety of applications where a DC control signal is required
• For indoor use only
Standards
• Low Voltage Directive 2006/95/EC
• WEEE Directive 2012/19/EU
• RoHs Directive 2011/65/EU
The MTP-X10K-NA potentiometer is developed to control equipment that needs
a stepless control signal. The supply voltage is within the range 0—12 VDC. The
output voltage is adjusted steplessly from 0 to the supply voltage (Us) by a rotary
knob. It is equipped with a switch (dry contact) for remote ON / OFF switching of
external equipment. The potentiometer is suitable for both for inset (IP44) and
surface mounting (IP54).