IOM BACNET GATEWAY

3 Product Description

Every main wire in this device can connect with a maximum of 64 indoor and 32 outdoor units.

The device features 4 main wires and can connect with a total of 384 indoor and outdoor units.

It features a built-in IMMP-BAC(A) function module and IMMPRO gateway function module. The

gateway can be used with IIMMPRO to enable the power billing function. The VRF system

and building management system are also integrated.

3.1 Device Monitor

1) Integrate with the building's system: the building management system obtains information

about the indoor and outdoor units by accessing a specific BACnet object. For details,

refer to the corresponding "object list". You can use the building management system to

set the operating status of the indoor unit by changing the corresponding BACnet object.

Refer to the corresponding "Object List" for details.

2) Integrate with the IIMMPro for VRF central air conditioner: this enables the power billing

function for the VRF unit. Or log into the web interface of IMMPRO gateway section under

the monitoring gateway to monitor multiple connections. For more details, see the

IMMPRO gateway operation section of this manual.

3.2 Supported Models

3.3 Based on Web Technologies

Using the WEB debugging function (it is recommended that you use the Google Chrome

browser), the gateway can connect to the local area network via the switch. The computer or

device must share the same network segment as the IP address of the central monitoring

gateway.

The web login address for the IMMPRO gateway function is: gateway IP: 8000. If the gateway

is 192.168.1.8, the web server address is: http://192.168.1.8:8000/ui/login/login.html. The

webpage function section consults the pure gateway function section.

* Please confirm with factory engineers regarding the models and functions of indoor and

outdoor units.

This gateway's default IP address is 192.168.1.8, which can be used to log in to the

debugging page of the IMMP-BAC(A) function.

Integrate with the IIMMPro for VRF central air conditioner: this enables the power billing

function for the VRF unit. Or log into the web interface of IMMPRO gateway section under

the monitoring gateway to monitor multiple connections. For more details, see the

IMMPRO gateway operation section of this manual.