SYSPLIT Remote controller RM10 OM

FP function

LOCK function

Keep pressing Fan button for more than 2 seconds to activate/disable Silence

function(some units).

Due to low frequency operation of compressor, it may result in insufficient cooling

and heating capacity. Press ON/OFF, Mode, Sleep, Turbo or Clean button while

operating will cancel silence function.

Silence function

Clean

Turbo

The unit will operate at high fan speed (while

compressor on) with temperature automatically

set to 8 C/46 F.

Press together Clean button and Turbo button at the

same time more than 5 seconds to activate Lock function.

All buttons will not response except pressing these two

buttons for two seconds again to disable locking.

Press this button 2 times during one second under HEAT Mode and setting temperature of

16 C/60 F or 20 C/68 F(for models of RG10A10(E2S)/BGEF,RG10B10(E2)/BGEF,

RG10B10(E2)/BGCEF) to activate FP function.

Press On/Off, Sleep, Mode, Fan and Temp. button while operating will cancel this function.

Note: This function is for heat pump air conditioner only.