SYSPLIT Remote controller RM10 OM

06
Turns indoor unit’s LED display
and air conditioner buzzer on and
off (model dependent), which
create a comfortable and quiet
environment.
ON/OFF
SET
Turns the unit on or off.
MODE
OK
TIMER
SHORTCUT
CLEAN
LED
Turbo
SLEEP
Scrolls through operation modes
as follows:
AUTO  COOL 
DRY 
HEAT  FAN
FAN SPEED
SWING
Model:
Increases temperate in
1°C (1°F) increments.
Max. temperature is
30°C (86°F).
NOTE: Press together &
buttons at the same time
for 3 seconds will alternate
the temperature display
between the °C & °F.
TEMP
TEMP
RG10B(E2)/BGEF(Fresh feature is not available)
RG10B10(E2)/BGEF & RG10B10(E2)/BGCEF(20-28 C/68-82 F)
RG10B2(E2)/BGCEF, RG10B10(E2)/BGCEF(Cooling only model,
AUTO mode and HEAT mode are not available )
Used to confirm the selected
functions
Decreases temperature
O O
in 1 C(1 F) increments.
Min. temperature is
O
O
O
O
16 C(60 F).
Set timer to turn unit on or off.
Saves energy during sleeping
hours.
Scrolls through operation
functions as follows:
Fresh( )
Follow Me( )
AP mode( ) Fresh ....


The selected symbol will
flash on the display area,
press the OK button to
confirm.
Selects fan speeds in the
following order:
AUTO LOW MED HIGH


NOTE: Holding this button
down for 2 seconds will activate
Silence feature.
Enables unit to reach preset
temperature in shortest
possible time
Used to restore the current
settings or resume previous
settings.

Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature(some units).
NOTE: HEAT mode is not
supported by the cooling only
appliance.
Used to start/stop the Self
Clean or Active Clean function.
(Model dependent, please refer
to the USER’S OPERATION &
INSTALLATION MANUAL).