SYSPLIT Remote controller RM10 OM

07
Turns indoor unit’s LED display
and air conditioner buzzer on and
off (model dependent), which
create a comfortable and quiet
environment.
ON/OFF
SET
Turns the unit on or off.
MODE
TIMER
FRESH
CLEAN
LED
TURBO
Scrolls through operation modes
as follows:
AUTO  COOL 
DRY 
HEAT  FAN
SWING
Increases temperate in
1°C (1°F) increments.
Max. temperature is
30°C (86°F).
NOTE: Press together &
buttons at the same time
for 3 seconds will alternate
the temperature display
between the °C & °F.
TEMP
TEMP
Used to confirm the selected
functions
Decreases temperature
O O
in 1 C(1 F) increments.
Min. temperature is
O O
16 C(60 F).
Used to start/stop the air fresh
feature.
Set timer to turn unit on or off
Scrolls through operation
functions as follows:
Follow Me( ) AP mode
( )
 Follow Me( )...

The selected symbol will
flash on the display area,
press OK button to confirm.
Enables unit to reach preset
temperature in shortest
possible time
Model: RG10B1(E2)/BGEF
FAN SPEED
Selects fan speeds in the
following order:
AUTO LOW MED HIGH


NOTE: Holding this button
down for 2 seconds will
activate Silence feature.

OK
SLEEP
Saves energy during sleeping
hours.
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature(some units).
NOTE: HEAT mode is not
supported by the cooling only
appliance.
Used to start/stop the Self
Clean or Active Clean function.
(Model dependent, please refer
to the USER’S OPERATION &
INSTALLATION MANUAL).
Fresh