EDM SYSHP MINI SPLIT TANK

1.19 HMI ADDRESS SET

MENU > FOR SERVICEMAN > HMI ADDRESS SET

HMI SET sets the wired controller is master or slave. (0=MASTER, 1=SLAVE)

When HMI SET is set to SLAVE, the controller can only switch the operaon mode, turn on or o, set the temperature, and

cannot set other parameters and funcons.

HMI ADDRESS FOR BMS sets the HMI address code for BMS.(only valid for master controller)

SOLAR INPUT sets whether solar control signal is connected to hydronic PCB. (0=NON; 1=CN18; Tsolar 2=CN11SL1SL2)

F-PIPE LENGTH sets the length of refrigerant pipes between outdoor unit and indoor unit.

RT/Ta_PCB sets whether hydronic adapter board is valid.

Pump silent mode can decrease water pump maximum output by 5% in order to decrease the noise of heat pump.

HMI ADDRESS SET