EDM SYSHP MINI SPLIT TANK

8.3 FOR SERVICEMAN Menu

FOR SERVICEMAN allows installers to input the system conguraon and set the

system parameters. To enter FOR SERVICEMAN, go to MENU > FOR SERVICEMAN.

Enter the password, using ◄ ► to navigate between digits and using ▼ ▲ to adjust

the numerical values, and then press OK. The password is 234.

Then the following pages will be displayed aer pung the password.

FOR SERVICEMAN password screen

FOR SERVICEMAN menu

1.4 DHW MODE SETTING Menu

1.4.1 DHW MODE SETTING menu overview

MENU > FOR SERVICEMAN > DHW MODE SETTING

DHW MODE SETTING menu

In DHW MODE SETTING the following parameters should be set.

DHW MODE enables or disables DHW mode. For installaons with DHW tanks, select YES to enable DHW mode. For installaons

without DHW tanks, select NON to disable DHW mode.

DISINFECT sets whether or not the disinfecon operaon is performed.

DHW PRIORITY sets whether domesc hot water heang or space heang/cooling takes priority. If NON is selected in the DHW

PRIORITY mode, when it is available and the space heang/cooling is OFF, the heat pump will heat the water as required. If space

heang/cooling is ON, the water will be heated as required when the immersion heater is unavailable.