SYSVRF2 CASSETTE MINI IM

5
Fig.5-3
Fig.5-4
Fig.5-7
Fig.5-8
Fig.5-9
Fig.5-10
All illustrations in this manual are for reference only.
They may be slightly different from the air conditioner
you purchased (depend on model). The actual shape
should be followed.
NOTE
45
5.3 Install The Panel
Remove the air inlet grid.
Never put the panel face down on floor or against the wall,
or on irregularly shaped objects.
Never drop or strike it.
Slide two grid switches towards the middle at the same time,
and then pull them up. (Refer to Fig.5-9)
Lift the grid up to an angle of about 45 , and remove it.
(Refer to Fig.5-10)
1
CAUTION
Grid switch
Install the panel on the main body with bolts (M5×20) and
washers. (Refer to Fig.5-11 )
Adjust the four panel hook screws to keep the panel horizontal.
Screw them into the ceiling evenly.
Adjust the panel in the direction of the arrow in
Fig.5-11
slightly to fit the panel's center to the center of the ceiling's
opening. Guarantee that the hooks of the four corners are
fixed well.
The installation cover of the swing motor must sink into
the corresponding water pan.
Install the panel
Align the swing motor on the panel to the tubing joints of the body.
(Refer to Fig.5-11)
Hang the two fixed ropes of the main body to the installation
cover and the other cover of the swing motor:
(Refer to
Fig.5-11
and )
2
CAUTION
523(Hook-location)
570(Body)
647(Panel)
Drainage side
Unit: mm
545(Hook-location)
570(Body)
Fig.5-5
A
60
647(Panel)
280
L
≥20
Ceiling
Panel
Hook
Nut
Body
)thgieh gniliec(H
600
270
50
Ceiling
Body
10-12
60
L=30～40
630(Body,include Electrical Box)
260
Liquid Pipe
Φ6.35(OD)
Gas Pipe
Φ12.7(OD)
Drainage Pipe
Φ25(OD)
30
167
Central hole
Hook hole
Installation paper board
Body
Fixing hole
Fig.5-6
Screws M5x20
(Accessory for the panel)
Colorless
trans parent pipe
Horizontal
indicator
Unit:mm