SYSVRF2 IM

13
4.8 Panel dismantling
8-22HP
(left and right pillar clasp)
5~10°
(lower panel hook)
(middle pillar clasp)
Fig.4-31
Fig.4-32
left pillar
right pillar
24-32HP
1. 8HP-22HP: Dismantle the left and right pillars: Remove the 4 screws from the left and right pillars. (Fig.4-31). Rotate both and then lift them 2
mm (Fig. 4-32 to remove them; 24HP-32HP: Dismantle the left, right, and middle pillars: Remove the 6 screws from the left and right pillars.
(Fig. 4-31). (Fig. 4-32) to remove them; 24HP-32HP: Dismantle the left, right, and middle pillars: Remove the 6 screws from the left and right
pillars. (Fig. 4-31).
2. Dismantle the upper panel: Remove 4 screws (8HP-22HP) or 6 screws (24HP-32HP) from the upper panel on left and right sides (Fig. 4-31
and Fig.4-32). Then lift the panel 3mm to remove it.
3. Dismantle the lower panel: Remove 4 screws (8HP-22HP) or 6 screws (24HP-32HP) from the lower panel on left and right sides (Fig. 4-31
and Fig.4-32) and then lift the panel 3 mm to remove it.
left pillar
right pillar
middle pillar