CORRIGO E LON INTERFACE VARIABLE LIST MANU

LON-interface variable list Chapter 2 Corrigo ventilation 9
Description explanation
(1) For these parameters it is possible to use both a local hard-wired digital input and
the Lon parameter. Activation of either alternative will trigger the function.
However, if a function has been set using the Lon network it must also be reset
using the Lon network since the nvi input value cannot be reset locally.
(2) The hysteresis variables have nothing to do with the control software in the
controller. They are internal to the LON interface and are used for minimising the
amount of communication in the LON network.
(3) Only Corrigo version 1.8 or later. CorrigoEVentilation1_8.APB and
CorrigoEVentilation1_8.xif are also required.
(4) Only Corrigo version 2.1 or later. CorrigoEVentilation2_1.APB and
CorrigoEVentilation2_1.xif are also required.
(5) Only Corrigo version 3.0 or later. CorrigoEVentilation3_0.APB and
CorrigoEVentilation3_0.xif are also required. The flow variables are given in l/s,
i.e. you divide the value by 3.6 to convert it to m
3
/h.
(6) Only Corrigo version 3.1 or later. CorrigoEVentilation3_1.APB and
CorrigoEVentilation3_1.xif are also required.