CORRIGO E LON INTERFACE VARIABLE LIST MANU

4 Chapter 1 About the manual LON-interface variable list
Chapter 1 About the manual
This document covers all versions of the LON-profiles. Certain variables are only
available for later versions of the Corrigo software. These variables are marked with a
number. Explanations are provided after each section. All variables are backward-
compatible.
New in this version: The profile for ventilation has been updated to version 3.1. See
page 9.
Application files for Corrigo ventilation
The files CorrigoEVentilation.APB and CorrigoEVentilation.XIF are included in the
E tool
©
distribution.
E tool
©
can be downloaded free of charge from Regin's website: www.regin.se.
After downloading and installing E tool
©
, the files can be found in the folder:
Exo\Slib\Corrigo\VentilationProgram\Lon.
Use the file CorrigoEVentilationX_Y that corresponds to the revision in the Corrigo.
The files CorrigoEVentilationX_Y-S should be used when the unit is marked –S.
Application files for Corrigo heating
The files CorrigoEHeating.APB and CorrigoEHeating.XIF are included in the E tool
©
distribution.
E tool
©
can be downloaded free of charge from Regin's website: www.regin.se.
After downloading and installing E tool
©
, the files can be found in the folder:
Exo\Slib\Corrigo\HeatingProgram\Lon.
Use the file CorrigoEHeatingX_Y that corresponds to the revision in the Corrigo. The
files CorrigoEHeatingX_Y-S should be used when the unit is marked –S.
The first time a Corrigo heating controller is used in a LON network, the application
file CorrigoEHeating.apb must be loaded to the Corrigo.
Use Echelon LonMaker (or any other LON network program that can download
application software to a LON device).