Argus RC

ManualsBrandsSystemair ManualsAir Distribution ProductsArgus-RC Room Controller - Stand alone room controllers 24/ 0-10V

Argus-RC

Room controller

• Awarded design

• Simple installation

Argus-RC is a room controller from the Argus series

intended to control heating and cooling in a zone control

system.

• On/Off or 0...10 V control

• Input for occupancy detector, window contact,

condensation detector and change-over function

Argus-RC is a room controller from the Argus series. It

does not have a communication connection.

Argus

Argus is a wide series of controllers which handle heating

and cooling.

The controllers are divided into three different

series; pre-programmed with communication, freely

programmable controllers with communication and

pre-programmed stand-alone controllers, to which

Argus-RC belongs.

Applications

The Argus controllers are suitable in buildings where you

want optimal comfort and low energy consumption, for

example ofﬁces, schools, shopping centres, airports, hotels

and hospitals etc.

See application examples on page 2.

Design

The controllers have a modern design. The design has

been awarded the 2007 “iF product design

award”.

The standard colour is white, but the frame

and centre can be received in a number of

different colours on inquiry. The units can be

combined, offering many different effects.

Sensor

The controller has a built-in sensor. An external

Pt1000-sensor can also be used.

Actuators

Argus-RC can control 0...10 V DC valve actuators and/or

24 V AC thermal actuators.

Easy to install

The modular design with a separate bottom plate for

wiring makes the whole Argus series easy to install and

commission. The bottom plate can be put into place

before the electronics are installed. Mounting is directly

on the wall or on an electrical connection box.

product

desi gn

award

2007

revision

08 2007

Summary of content (4 pages)

PAGE 1
RC revision 08 2007 Argus-RC Room controller Argus-RC is a room controller from the Argus series intended to control heating and cooling in a zone control system. • Awarded design • On/Off or 0...10 V control • Simple installation • Input for occupancy detector, window contact, condensation detector and change-over function Argus-RC is a room controller from the Argus series. It does not have a communication connection.
PAGE 2
RC Control states Argus-RC has control state: • Heating and cooling in sequence The change-over function can be activated, see below. Operating modes There are three different operating modes: Stand-by, Occupied and Bypass. Occupied is the preset operating mode. It can be changed to Stand-by with a dipswitch. The operating modes can be activated via an occupancy detector. Stand-by: The room is in an energy save mode and is not used at the moment.
PAGE 3
RC Technical data Supply voltage Internal consumption Ambient temperature Storage temperature Ambient humidity Protection class Built-in temperature sensor Material, casing Weight Colour 18...30 V AC, 50...60 Hz 2.5 VA 0...50°C -20...+70°C Max 90% RH IP20 NTC type, measuring range 0...50°C, accuracy +/-0.5°C at 15...
PAGE 4
RC Wiring Terminal Designation Operation 10 G Supply voltage 24 V AC 11 G0 Supply voltage 0 V 12 DO1 Output for forced ventilation 13-14 No function 20 GDO 24 V AC out common for DO 21 G0 0 V common for UO (when 0...10 V actuator is used) 22 No function 23 UO1 Output for 0...10 V valve actuator alt. thermal actuator. Heating or cooling. 24 UO2 Output for 0...10 V valve actuator alt. thermal actuator. Heating or cooling.