INSTALLATION OPERATION AND MAINTENANCE INSTRUCTION KBT002

1 Introduction
1.1 Product description
The product is a centrifugal thermo box fan with AC or EC
motor, and a casing that is made from galvanized steel and
has mineral wool as insulation. The product is supplied with
built-in weather protection and a drain plug for condensation.
The product is applicable for extract air flow connected to a
duct system, and transportation of clean and contaminated
air (for example dust, kitchen exhaust).
The product is not supplied with an external speed control or
installation equipment, these parts are available and recom-
mended as accessories.
1.2 Intended use
The product is applicable for kitchen exhaust ventilation with
a maximum constant airflow temperature of 120 °C.
The product is not applicable for transportation of air that
contains explosive, flammable or aggressive media. The
product is not applicable for locations where there is a risk of
explosion.
1.3 Document description
This document contains instructions for installation, operation
and maintenance of the product. The procedures must be
done by approved personnel only.
Speak to Systemair for more information on how to install the
product in different installation locations.
1.4 Product overview
2
1
3
4
11
12
10
6
7
5
8
9
1. Duct connection
2. Casing
3. Service door
4. Weather protection
5. Name plate
6. Motor
7. Motor name plate
8. Connection box
9. Handle
10. Mounting feet
11. Fan impeller
12. Drain plug
1