TOPVEX FC OPERATING MAINTENANCE 125918A003

Commissioning
|
9
MMaaiinn mmeennuu iitteemm
SSuubb--mmeennuu iitteemm 11 SSuubb--mmeennuu iitteemm 22 EExxppllaannaattiioonnss
→AI exp3
Status of the Analogue inputs for
expansion unit.
OOnnllyy vviissiibbllee ffoorr ccoouunntteerr--
//ccrroossssffllooww uunniittss wwiitthh aa
ccoonnnneecctteedd pprreessssuurree mmoodduullee
→DI
Status of the Digital inputs.
→UI
Status of Universal Analogue inputs
or Universal Digital inputs.
→UI exp3
Status of the Universal Analogue
inputs for expansion unit.
OOnnllyy vviissiibbllee ffoorr ccoouunntteerr--
//ccrroossssffllooww uunniittss wwiitthh aa
ccoonnnneecctteedd pprreessssuurree mmoodduullee
→AO
Status of the Analogue outputs.
→DO
Status of the Digital outputs.
→Temperature
Extract air temp
Actual: ºC
Setp: 22.0ºC
Configured temperature control
(default is Extract air temp).
Actual temperature in the chosen
control mode.
Set-point temperature for the
chosen control mode.
If cascade control
Max/min supply
setp.
Max: 30ºC
Min: 14.0ºC
Set the maximum and minimum
allowed supply air temperature in
case of cascade control.
LLooggoonn ttoo sseerrvviiccee lleevveell nneeeeddeedd ttoo
cchhaannggee sseettttiinnggss.
Outdoor temp: ºC
Supply air temp
Act.: ºC
Setp: 18ºC
Neutral zone 0.0 °C
Actual outdoor air temperature.
Actual supply air temperature.
Calculated supply air set point. The
extract air controller output signal
generates the supply air controller’s
set point value.
A neutral zone can be set around
the setpoint value.
Note:
See Corrigo manual-
Ventilation application for
more information.
Frost protection
Actual: ºC
Actual water temperature in the
water heating battery. (Only visible
for HW units).
125918 | A003