TOPVEX FC INSTALLATION INSTRUCTION 125917 CE A006

Installation |
13
4.6 Mounting the sliding door kit
A sliding door kit for the inspection doors can be acquired as an accessory and can be mounted on the units. The kit is
installed according to below procedure.
1 Hinges
Close the hatch with all 4 or 6 handles (depending on
model) and unscrew the 2 hinges.
2 Repeat procedure
Repeat on the other hatch.
3 Mount the wheels
Mount the wheels in the prepared threaded inserts on
the side of the inspection hatch with the enclosed
screws and washers.
4 Sliding door support rails
Mount the sliding door rails on each side of the unit.
Fasten it to the casing with screws in the prepared
threaded inserts.
125917 | A006