CORRIGO VENTILATION 3.6 MANU

22 Chapter 3 Installation and wiring Manual Corrigo Ventilation, revision V

Description E tool
©
Display
Extra alarm 2 Extra alarm 2 Ext alarm2
Extra alarm 3
Extra alarm 3
Ext alarm3
Extra alarm 4 Extra alarm 4 Ext alarm4
Extra alarm 5
Extra alarm 5
Ext alarm5
Extra alarm 6
Extra alarm 6
Ext alarm6
Extra alarm 7 Extra alarm 7 Ext alarm7
Extra alarm 8
Extra alarm 8
Ext alarm8
Extra alarm 9 Extra alarm 9 Ext alarm9
Extra alarm 10
Extra alarm 10
Ext alarm10
Start extra motor 1
Motor control 1
Motor1
Start extra motor 2 Motor control 2 Motor2
Run-indication/alarm extra motor
Motor control 1 indication
Ind motor1
Run-indication/alarm extra motor Motor control 2 indication Ind motor2
The universal inputs on Corrigo E28 can be individually configured as either analogue inputs, using
any of the analogue input signals above, or as digital inputs using any of the digital inputs above.
Analogue output signals

Description E tool
©
Display
Inactive output Not used Not used
Y1 actuator heating
Heating Y1
Y1 heating
Y2 actuator exchanger
Exchanger Y2
Y2 exchanger
Y3 actuator cooling Cooling Y3 Y3 cooling
Frequency converter, supply air fan
SAF
SAF
Frequency converter, extract air fan EAF EAF
Actuator Humidity control Dehumidification/
Humidification
Humidity
Split of any one of temp outputs Y1, Y2,
Y3 or Y1 Heating/Y3 Cooling outputs
Split Split
Extra controller Extra unit control Extra unit
Y1 heating / Y3 cooling, change-over
output
Y1 heating/Y3 cooling Y1 heat/Y3 cool
Y4 extra sequence
Also used for control of recirculation air
damper 0...10 V
Extra sequence Y4 Y4 extra sequence
Y5 extra sequence
Extra sequence Y5
Y5 extra sequence
Temperature output
Optional temperature 0…10 V
Temperature Temperature