CORRIGO VENTILATION 3.6 MANU

Manual Corrigo Ventilation, revision V Chapter 17 Configuration 113
17.31.5 Display anywhere (remote control)
If multiple Corrigo units are connected in a network, it is possible to remote control a unit in the
network from a unit with display. You do this by entering the address of the unit you wish to remote
control in the unit with display. The function is aborted by pressing the buttons UP, OK and DOWN
simultaneously.
Address for
remote communication
(PLA:ELA) : 00:00
17.31.6 Automatic logoff
If the access level is Operator, Service or Admin, the user will automatically be logged off to Normal
after a settable time of inactivity. The time is settable in units of 5 seconds. Standard 60 units = 5
minutes.
The automatic logoff can be removed, see 8.4.
Time before user
is automatically
logged off:60
(Unit 5 s)
17.31.7 Activation of start-up wizard
The start-up wizard is a special program which at the first start-up guides the operator through a
number of start-up menus where you set certain operation parameters. For more information, see the
section Start-up wizard.
Activate wizard
No